Tour Edge
Out of Stock/Discontinued
Buy the Tour Edge Hot Launch E521 Iron Woods from Just Say Golf. Hand-Built in the USA with a Lifetime Limited Warranty. Headcover Included.
The raised steel mass area of the patented Houdini Sole at the rear of the clubhead reduces the amount of sole area to reduce drag and turf interaction by 35%.
The Houdini Sole was instrumental in significantly altering the CG placement of the E521 Iron-Wood. The CG is 10% lower and 15% further back than the previous HL4 Iron-Wood, making E521 the highest launching and easiest to hit iron-wood Tour Edge has produced.
Hollow-body perimeter weighting produces distance properties of a metalwood in an iron design for maximum ball speed. The hollow-body design makes for an extremely low and back CG, helping to create a very forgiving and powerful face.
The offset design of the E521 Iron-Wood helps square the clubhead atimpact to produce anti-slice ball flights.
The super-shallow Cup Face design in the Hot Launch E521 Iron-Wood produces higher launch angles and extreme ease of launch. This super-thin forged face design produces the pinnacle of extreme ease of launch, increased apex heights, hang time and distance.
The E Series iron-wood comes stock with the same super-light FUBUKI metalwood shafts by Mitsubishi Chemical that range from 55-grams to 60-grams depending on the flex.
The extremely light FUBUKI shafts feature lower kick points and lower cycles per minute frequencies that promise to help players achieve maximum velocity and to fight the fade to produce a longer, straighter and a slightly drawn ball flight.
It is also available in a KBS MAX 80 steel shaft. The KBS MAX 80 is a lightweight lowkick point steel shaft that produces a high trajectory for longer distance shots.
| Model | Loft | Lie Angle | Mens Standard Length | Ladies Standard Length |
| 3 Iron-Wood | 20° | 60° | 39.25" | 38.25" |
| 4 Iron-Wood | 23° | 60.5° | 38.75" | 37.75" |
| 5 Iron-Wood | 26° | 61° | 38.25" | 37.25" |
| 6 Iron-Wood | 29° | 62° | 37.75" | 36.75" |
| 7 Iron-Wood | 32° | 62.5° | 37.25" | 36.25" |
| 8 Iron-Wood | 36° | 63° | 36.75" | 35.75" |
| 9 Iron-Wood | 40° | 63.5° | 36.25" | 35.25" |
| PW Iron-Wood | 44° | 64° | 35.75" | 34.75" |
| AW Iron-Wood | 49° | 64° | 35.75" | 34.75" |
| Model Graphite | Flex | Weight | Launch | Torque |
| Mitsubishi Fubuki HD50 | Ladies | 50 grams | High | 6.0° |
| Mitsubishi Fubuki HD55 | Senior-A | 55 grams | High | 5.0° |
| Mitsubishi Fubuki HD55 | Regular | 55 grams | High | 4.5° |
| Mitsubishi Fubuki HD60 | Stiff | 60 grams | High | 4.0° |
| Model Steel | Flex | Weight | Launch | Torque |
| KBS Max 80 | Regular | 102grams | Mid/High | 3.0° |
| KBS Max 80 | Stiff | 102grams | Mid/High | 3.0° |
Lamkin Z5
